RADVision Scopia XT5000 Series Instalační příručka stáhnout pdf (Strana 148)

Procedure

1. Access the echo cancellation settings, as follows:

•

From the Scopia XT Endpoint for IP Office web interface, select Administrator

Settings > I/O connections > Audio-Inputs > Echo canceller.

•

From the endpoint's Main menu, select Configure > Advanced > I/O connections >

Audio-Inputs > Echo canceller.

Figure 94: Configuring echo cancellation settings

2. Set the Audio delay automatic estimation field to Yes.

This enables the endpoint to constantly measure the audio delay.

3. Set the Apply audio delay value field to Yes.

This enables the system to fix problems with the audio delay.

4. From the web interface only, select Save.

5. If necessary to further fine tune audio delay, perform these steps:

a. Navigate to Audio tests as follows:

•

From the endpoint's Main menu, select Configure > System Status >

Diagnostics > Audio > Tests.

•

From the web interface, select Diagnostics > Audio > Tests.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Troubleshooting the Scopia XT Endpoint for IP Office | 148

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 158 159

Žádné komentáře

RADVision Scopia XT5000 Series Instalační příručka Strana 148