RADVision SCOPIA XT4000 Series Instalační příručka Strana 48
- Strana / 91
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Table 5-7 Configuring advanced camera settings
Field Name Description
Enable (this field
appears on the HD2
and DVI pages only)
Enable for the optional camera.
Moving (PTZ) If necessary, enable the camera pan, tilt and zoom functionality.
White balance
mode
In case the lighting in the room is not sufficient, you can make
adjustments to the colors of the image sent by the camera.
•
To allow the camera to automatically adjusts colors to room
lighting, set to Automatic.
•
To calibrate color temperature so that the image is neither
blue nor red color prevails, set to Customize.
•
To calibrate colors manually, set to Manual.
Backlight
compensation
If there is excessive backlighting, select this option to filter out
some of the backlighting.
Exposure
compensation
In case the lighting in the room is excessive, enable and define
exposure compensation to filter out some of the lighting.
Focus mode Set the camera focus:
•
To set the camera focus automatically, select Automatic.
•
To adjust the camera focus manually, select Manual, and then
set the distance from the cameras to the table.
c. Select Save.
Step 6
If necessary, configure the optional camera connection:
Note
An optional camera is available for selected models only.
a. Select DVI under Cameras.
b. Configure settings as described in Table 5-7 on page 43.
c. Select Save.
Configuring the Computer Connection
Perform this procedure if you configure a device connected to a computer to your SCOPIA XT
Series.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
In the Administrator Settings tab, select I/O connections > Cameras > DVI.
RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 43
- SCOPIA XT4000 Series 1
- Table of Contents 3
- About the SCOPIA XT Series 6
- Deployment 9
- Supporting ISDN Connectivity 14
- Inspecting the Product 16
- Mounting of the XT Codec Unit 18
- Connecting SCOPIA XT Series 19
- Connecting the Microphone Pod 20
- Figure 4-3 Microphone Setup 21
- Procedure 21
- XT4000 Series 22
- Control Unit 26
- Using a DVD or Blu-ray Player 27
- Connecting the Computer 29
- Initial Configuration 31
- Before you begin 35
- Adjusting the Image Position 36
- Select Next 37
- Configuring Network Settings 38
- Setting System Preferences 40
- Setting the Time Zone 41
- Setting Regional Information 42
- Configuring Video Connections 45
- Configuring Audio Connections 53
- Configuring Audio Outputs 58
- Configuring Gatekeeper Use 68
- Configuring SIP Server Use 72
- Select Add Server 76
- Configuring Call Properties 77
- Configuring Call Settings 78
- Securing Calls 83
- Select Save 90
Brilliant 78270/04 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Deckenbeleuchtung Brilliant 78270/04.
Wir stellen 1 PDF-Handbücher Brilliant 78270/04 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Komentáře k této Příručce